Search

HAN-HSFPV2520

Super Flo Valve - Hansen Super Flow Valves

Style
Inlet
Spare Parts

*** Float sold Separately, please add both to cart if required ***

For Spare Adapters please click here

  • Application:

    The Hansen Super Flo Piston Valve has been designed with multiple thread and connection combinations. To increase overall durability and versatility, the "slipper Fit Piston" design reduces sticking and increases efficiencies.. Less operating pressure is required reducing pumping costs with increased flows. Mini body design allows for easy installation across a wide range of applications and the ability to operate in clean or dirty water applications.

    Products Options Plastic Body:

    Long Arm Version :

    Part number - Inlet fitting sizes & style
    HSFPV2520 - 15mm, 20mm & 25mm Standard Adapters 
    HSFPV2520L - 20mm & 25mm Long Tail Adapters
    HSFPV2015L - 15mm & 20mm Long Tail Adapters

    Short Arm Version :

    HSFPV2520S - 15mm, 20mm, & 25mm Standard Adapters
    HSFPV2520LS - 20mm & 25mm Long Tail Adapters
    HSFPV2015LS - 15mm & 20mm Long Tail Adapters

    Inch Conversion
    15mm ="
    20mm = 3/4"
    25mm = 1"

    Products Options Brass Body:

    Long Arm Version :

    Part number - Inlet fitting sizes & style
    HSFPV2520B - 15mm, 20mm & 25mm Standard Adapters 
    HSFPV2520BL - 20mm & 25mm Long Tail Adapters
    HSFPV2015BL - 15mm & 20mm Long Tail Adapters

    Short Arm Version :

    HSFPV2520BS - 15mm, 20mm, & 25mm Standard Adapters
    HSFPV2520BLS - 20mm & 25mm Long Tail Adapters
    HSFPV2015BLS - 15mm & 20mm Long Tail Adapters

    Inch Conversion
    15mm ="
    20mm = 3/4"
    25mm = 1"

     Features and Benefits

    • High Performance and Cost Effective Trough Valve (29 psi, 188 l/min)
    • Designed with a 25mm (1”) female thread on the valve outlet
    • Supplied with 15, 20 & 25mm adaptors to fit a range of inlets
    • Ability to attach to any number of poly pipe fittings ie portable troughs, irrigation systems, animal/feeder/vehicle washdowns, spray tanks
    • Each valve will fit multiple thread and connection combinations
    • Strong Compact Design
    • Delivers high volumes of water quickly with unrestricted full flow
    • “Slipper Fit Piston” design to reduce valve sticking
    • Low operating pressure required reducing pumping costs and increasing flow
    • Mini body design to enable easy installation
    • Manufactured from strong, non corrosive UV Stabilised materials
    • Available in Female and Male BSPT, NPT, ACME thread configurations
    • Suitable for High/Low Pressure operations (from 0 Bar r)
    • Variable open and close action preventing valve bounce and water hammer

      Technical Information:

    • Installation Guide:

      • Flush pipe lines into water tank or troughs before installing Super~Flo Valve into new system
      • Isolate the water going to replace valve in existing scheme
      • Thread O-Ring end of correct size male adapter into valve body and tighten firmly enough that the O-Ring creates a seal against the face. Do not over tighten.

       

           Side Entry Trough:

      • Thread Super Flo Valve into existing trough fitting
      • Screw the Nut with cord onto the Super Flo Brass arm
      • Thread cord through the Super Flo float. Tie the cord off to achieve the correct on/off and water level

         

      Top Entry Trough:

      • Thread Super Flo Valve into existing trough fitting
      • Screw the float onto the brali>
      • Hold the body of the valve at arm entry point
      • Bend brass arm to achieve the correct on/off and water level.

    • F.A.Q.

      Q - My troughs have both 20mm & 25mm threaded inlets, does your Hansen Super Flo Valve come in both sizes?
      A - Yes each Hansen Super Flo  Valve comes with the required components to install in 20mm or 25mm threaded inlets. This of course means you only have to buy one valve for all sized inlets.

      Q - Will the higher flow cost me more to run my pump?
      A - No, because the Hansen Super Flo Valve is more efficient than what you are used to. The reduced operating pressure required will equate to higher flows at lower pressures at your pump which in turn will reduce pumping time and cost.

      Q - At present I get valve bounce in my troughs, will your valve stop this?
      A - Yes, valve bonus created from high flows at high pressures, because our Hansen Super Flo Valve delivers higher flows than other valves it will effectively reduce line pressure which in return will reduce the incidences of this problem also reducing water hammer.

      Q - I have problems with having to forever clean my valves as my water supply can get dirty at times, how will the Hansen Super Flo Valve handle these conditions?
      A - We have designed the Hansen Super Flo  Valve to work in either clean or dirty water situations.

      Q - What pressure can I run my Hansen Super Flo Valve at?
      A - The Hansen Super Flo Valve will operate from 0.2bar to 12bar.

       Q - The valves I have at present have a tendency to jam open or closed costing me time and either a bog around my trough or no available water for my stock, will your valve stop this problem?
      Yes the Hansen Super Flo Valve has a new patent pending “Slipper Fit Piston” design seal assembly to minimize this problem.

      Q - At certain times of the year I need to run portable troughs in my paddocks, is it possible to run these off my existing Super Flo trough valve?
      A - Yes, the Super Flo trough valve incorporates a") female thread on the valve outlet which you can utilize the spare adapters that come with this valve to enable you to attach any number of poly pipe fittings to the Super~Flo trough valve. This off take can be used for any number of farm applications.