Search

HAN-HNT15

Hansen - Nut Hose Tail - HNT - HNTE - HNTW

Size

Hansen nut and tail fittings are used to connect a hose to a male thread, can be taken off without the hose needing to turn

Features and Applications:

  • Largest range of durable, high strength, commercial quality Threaded Pipe Fittings in the Southern Hemisphere
  • Precision Heavy Duty Tapered Threads give a Strong Reliable Seal
  • Manufactured from a Raw Material Approved For Use With Potable (drinkable) Water
  • Manufactured from High Quality Glass Fibre Reinforced Nylon giving a Weather, Termite, Fungi & Bacteria Resistant
  • Common Applications Include Horticultural, Agricultural, Irrigation, Marine & Plumbing
  • Material strong enough to minimise potential cross threading
  • WRAS - Approval for use with potable (drinkable) water as they will not leach contaminants into the water.
  • Suitable for use above or below ground in varying operating pressures and temperatures
  • Strong, Lightweight and Compact
  • Available in a variety of thread combinations and connections.
  • New Zealand Made

Features and Applications of  Spare Washer:

  • Black Rubber Washer Material; Thermoplastic Rubber
  • Used with the Nut & Hose Tail - SNT
  • Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by warranty.

Approvals:

WRAS Approved Product - ASNZS 4020 - Approved in sizes from 6mm to 1" to 4")

Sizes:

Nut Hose Tail

Part Number - Metric Size - Imperial Size 
HNT15 - 15mm BSP x 15mm Hose |" BSP x 1/2"�Hose
HNT20�- 20mm BSP x 20mm�Hose�| 3/4" BSP x 3/4"�Hose
HNT2015 - 20mm BSP x 15mm�Hose�| 3/4" BSP x 3/4"�Hose
HNT25�- 25mm BSP x 25mm�Hose�| 1" BSP x 1"�Hose
HNT2515 - 25mm BSP x 15mm�Hose�| 1" BSP x 1"�Hose
HNT2520 - 25mm BSP x 20mm�Hose�| 1" BSP x 1"�Hose
HNT32�- 32mm BSP x 32mm�Hose�| 1 1/4" BSP x 1 1/4"�Hose
HNT40�- 40mm BSP x 40mm�Hose�| 1 1/2" BSP x 1 1/2"�Hose
HNT50�- 50mm BSP x 50mm�Hose�| 2" BSP x 2"�Hose
HNT80�- 80mm BSP x 80mm�Hose�| 3" BSP x 3"�Hose
All HNT Fittings�are Rated to 10 Bar Pressure�

NutHose Tail Elbow

Part Number - Metric Size - Imperial Size�
HNTE20�- 20mm BSP x 20mm�Hose�| 3/4" BSP x 3/4"�Hose
HNTE25�- 25mm BSP x 25mm�Hose�| 1" BSP x 1"�Hose
All HNTE Fittings�are Rated to 10 Bar�Pressure

Nut Rubber Washer - For Nut and Tail

Part Number - Metric Size - Imperial Size

HNTW15 - 15mm - 1/2"
HNTW20 - 20mm - 3/4"
HNTW25 - 25mm - 1"
HNTW32 - 32mm - 1 1/4"
HNTW40 - 40mm - 1 1/2"
HNTW50 - 50mm - 2"
HNTW80 - 80mm - 3"