HAN-LEVELALERT
$285.00 NZD
All prices include GST
Big Water Tanks is an official stockist of Hansen Products. The Hansen Level Alert is a heavy duty tank level indicator: see your tank water level at a glance from the ground and help prevent pump burnout caused by Dry Tank Syndrome. Suits plastic, concrete and steel tanks of any type or size. Need a spare part or an extra tube? Jump to spare parts.
The Hansen Level Alert shows your tank's water level from a distance. The blue float inside the tank rises and falls with the water, moving a 16mm stainless steel tube, with a HiViz float on top, up and down through a guide tube in the tank roof. The higher the HiViz float, the fuller the tank. Hansen designed it as a sturdier, more robust tank level indicator: a thicker, stronger, more weather resistant stainless steel tube, a solid but adaptable UniTri mounting base for all types of surfaces, and UV weather resistant and stainless steel materials throughout. Below you will find what is in the box, Hansen's dimensions, step-by-step installation and quick-add spare parts.
Using the Level Alert in anything other than water? Check Hansen's Level Alert chemical resistance chart first.
View Level Alert Chemical Resistance ChartTechnical documents are published by Hansen Products (NZ) Ltd.
| Delivery | Courier nationwide. Shipping is calculated at checkout based on your location. |
| Collections | Available from 21 Akatea Road, Glendene, Auckland. |
From Hansen's installation instructions ("Each pack includes"):
| Item | Qty |
|---|---|
| Assembled UniTri Mount | 1 |
| 115mm HiViz threaded float | 1 |
| 230mm blue threaded float (155 × 230mm) | 1 |
| 669mm stainless steel tubes: 1 male/male and 2 male/female | 3 |
| UniTri mount screws | 3 |
| Security lock screws | 2 |
| Plastic wing nuts (plastic tanks) | 3 |
| Plastic plugs (concrete tanks) | 3 |
| 7mm masonry drill bit (concrete tanks) | 1 |
| 4mm drill bit (plastic tanks) | 1 |
You only need the fixings for your tank type: wing nuts for plastic tanks, plugs for concrete tanks.
The full tank visible level (c) is how far the tube shows above the mount when the tank is full. Hansen's figures:
| No. of Tubes | Full Tank Visible Level (c) |
|---|---|
| 1 | 469mm |
| 2 | 1,138mm |
| 3 | 1,800mm |
The kit includes 3 tubes, enough for a tank fluid level reading of up to 2 metres. For taller tanks, add extra 669mm tubes. Hansen notes the Dual Float Adaptor is used to attach a second float when using 4 extension rods.
Hansen's Level Alert dimensions. Tube length (a) and overall length including floats (b) depend on how many 669mm tubes you join. The UniTri mount base is 140mm across the inner circle and 180mm across the outer circle.
Reading the drawing:

| No. of Tubes | Tube Length a (mm) | Overall Length incl. Floats b (mm) | Full Tank Visible Level c (mm) |
|---|---|---|---|
| 1 | 669 | 1,034 | 469 |
| 2 | 1,338 | 1,703 | 1,138 |
| 3 (as supplied) | 2,000 | 2,365 | 1,800 |
Specifications and sizes may change without prior notice (Hansen).
Hansen's installation instructions, with Hansen's own illustrations. You will need a drill and a spirit level; the drill bits are in the box.

Choose a mounting position close to an inspection cover or hatch. Mark, then drill a hole or series of holes larger than the Guide Tube (see Step 3 for the correct drill).

Place the assembled UniTri Mount in the hole, loosen the Cap Nut, lift and rotate the Guide Tube to achieve a vertical position, then lightly tighten the Cap Nut.

Select the correct drill: the 7mm masonry drill for concrete tanks or the 4mm drill for plastic tanks. Using the UniTri Mount as a template, mark and then drill three holes in the tank to match the UniTri Mount.

For concrete tanks, insert the Plastic Plugs into the holes before winding in the screws. For plastic tanks, hold the Wing Nut in place inside the tank while winding in the screw from the outside.

Screw the HiViz Float onto one end of the male/male threaded Stainless Steel Tube. Screw additional Stainless Steel Tubes onto the first tube as required, then tighten all tube joints with a suitable spanner.

Slide the Stainless Steel Tube assembly through the mounted Guide Tube, reach inside the tank and attach the Blue Float to the other end of the Stainless Steel Tube.

With a spirit level, make sure the Stainless Steel Tube is plumb (vertical), then firmly hand tighten the Cap Nut.

Drill a 4mm hole in each of the security housing locations, insert the security screws and tighten.
Genuine Hansen Level Alert spare parts. The most common is the extra 669mm stainless steel tube (rod); the rest are spares. Tap Add to cart to add one to your cart, or see all parts on the Level Alert spare parts page.
Hansen code HLASSTUBE
669mm stainless steel tube, 16mm diameter. Add tubes for taller tanks or replace a damaged tube. Supplied as 1 male/male tube; the end can be removed to make it male/female (Hansen).
$69.00 NZD
Hansen code HFLOAT115HI
$8.15 NZD
Hansen code HFLOAT230L
$11.65 NZD
Hansen code HLAUNIMOUNT
$35.00 NZD
Hansen code HLAGUIDE
$40.00 NZD
Hansen code HLANUTB
$16.00 NZD
Hansen code HLALSCREW
$10.00 NZD
Hansen code HLAMSCREW
$10.00 NZD
Hansen code HLANUTS
$15.00 NZD
Hansen code HLAPLUGS
$10.00 NZD
Hansen code HDUALFLOATA
$13.65 NZD
Hansen code LADRILLBIT4
$12.00 NZD
Hansen code LADRILLBIT7
$12.00 NZD
Yes. Hansen has covered this in two ways: firstly with a HiViz UV stabilised, low wind resistance float, and secondly with a glass reinforced nylon guide tube and a larger diameter (16mm) stainless steel tube that reduces the chance of bending. The security lock screws also lock the tubes into a vertical position to prevent jamming in any weather.
Yes. The fully adjustable UniTri mounting base adapts to most tank roof angles, with a full 35 degrees of adjustment each way, so once installed you never need to adjust it.
Yes. The Hansen Level Alert comes with stainless steel fasteners for installation on steel, plastic and concrete tanks. Use the plastic wing nuts and 4mm drill for plastic tanks, and the plastic plugs and 7mm masonry drill for concrete tanks.
Hansen understands the value of your time. With the Hansen Level Alert there are no ropes and pulleys, tubes or smoke and mirrors, only the time-tested strength of glass fibre reinforced nylon and Hansen's simple, effective design.
With the 3 supplied tubes, the Level Alert reads a tank fluid level of up to 2 metres. Additional 669mm stainless steel tubes are available for taller tanks. Hansen notes the Dual Float Adaptor is used to attach a second float when using 4 extension rods.
Yes. Every part is available separately in the Spare Parts section above, including extra 669mm stainless steel tubes, both floats, the UniTri mount, guide tube, cap nut, screws, plugs, wing nuts and drill bits. They are also listed on our Level Alert spare parts page.
Yes. All Hansen products carry Hansen's Limited Lifetime Warranty (conditions apply).
Great product, very well made.
Great company to deal with!
Awesome design easy to install fast delivery great service and product all round
Excellent service and delivery.Level Indicator easy to install,works very well,and competitive pricing.Highly reccomend product,and Big water Tanks.
works great
To be honest there is a lack of description as to what size hole you need in the top of the tank unless I missed it and I think a hole saw would be better than a small drill bit.
It all works fine once installed but I do feel it is a over priced in this world of plastic but a good product.