Search

HAN-HSS15

Hansen - Hex Socket - HSS

Size

Big Water Tanks is an official stockist of Hansen Products — New Zealand-made True Fit threaded fittings for plumbing, irrigation, rainwater, farm and marine water systems. The Hansen Hex Socket (HSS) joins two male threads of the same size, with a BSPT female thread in each end and a hex body for a spanner, in 9 sizes from 15mm (1/2") up to 100mm (4").

Hansen True Fit Hex Socket (HSS): BSPT Female × Female Thread Connector

A hex socket is the simplest way to join two male threads of the same size, for example two 25mm (1") male threaded pipe ends, or a 1" male valve to a 1" male hose tail. The Hansen HSS has a tapered BSPT female thread in both ends (T1 and T2, the same size) and a hex shaped body for a spanner. Hansen describes it as "used to connect two male threads". It is moulded in New Zealand from glass fibre reinforced nylon, is rated up to 16 bar at 20°C in sizes up to 50mm, and is tested to AS/NZS 4020:2018 for contact with drinking water. Below you will find the full dimension table for every size we sell, the pressure and temperature ratings, how to pick the right size, and installation tips straight from Hansen.

Quick Facts

  • Thread type: BSPT (tapered) female × BSPT female, same size both ends
  • Sizes: 9 sizes, 15mm (1/2") to 100mm (4")
  • Max working pressure @ 20°C: 16 bar up to 50mm · 12 bar at 65mm · 10 bar at 80–100mm
  • Max temperature: 60°C (140°F) — cold water use
  • Drinking water: AS/NZS 4020:2018 tested and WRAS approved range
  • Made in: New Zealand (Hansen Products, Whangarei)

Key Features & Benefits

  • Precision Tapered Threads: Heavy duty BSPT tapered female threads in both ends give a strong, reliable seal
  • Strong Glass Fibre Reinforced Nylon: Weather, termite, fungi and bacteria resistant, and strong enough to minimise potential cross threading
  • Safe for Drinking Water: Made from a raw material approved for potable (drinkable) water; tested to AS/NZS 4020:2018
  • Above or Below Ground: Suitable for varying operating pressures and temperatures (see the pressure table)
  • Strong, Lightweight & Compact: UV stabilised black nylon with a hex body for spanner tightening
  • Full Size Range: 9 sizes from 1/2" (15mm) up to 4" (100mm). Sizes 15mm–50mm are stocked in store; we hold limited stock of other sizes and can order them in if needed
  • Common Applications: Horticulture, agriculture, irrigation, marine, rainwater and plumbing
  • Largest Range: Part of the largest range of commercial quality threaded pipe fittings in the Southern Hemisphere, available in a variety of thread combinations and connections
  • Hansen Limited Lifetime Warranty: All Hansen manufactured products carry Hansen's Limited Lifetime Warranty (conditions apply)
  • New Zealand Made

Pressure Rating

Thread Size Max @ 20°C kPa @ 20°C @ 40°C @ 60°C
6mm – 50mm (1/8" – 2") 16 bar 1,600 kPa approx. 12 bar approx. 8 bar
65mm (2 1/2") 12 bar 1,200 kPa approx. 9 bar approx. 6 bar
80mm – 100mm (3" – 4") 10 bar 1,000 kPa approx. 7.5 bar approx. 5 bar

Ratings are by thread size. The 20°C figures are Hansen's published maximum working pressures. The 40°C and 60°C figures are read from Hansen's straight-line derating graph and are approximate. Ratings apply to fittings used with water only and installed to Hansen's specifications. Hansen tests its products for cold water use up to 60°C (140°F) and does not recommend use above 60°C.

Materials & Standards

Material

Body: high quality glass fibre reinforced nylon (the AS/NZS 4020 test report lists the compound as Polyamide 6 Glass Fibre Reinforced — Durethan BKV 15F). Black, UV stabilised.

AS/NZS 4020:2018 — Products in Contact with Drinking Water

The Hansen EasyFit and True Fit range passed AS/NZS 4020:2018 testing (taste, appearance, growth of aquatic micro-organisms, cytotoxic activity, metals and organic compounds) at the Australian Water Quality Centre, report 356792, completed 7 March 2023.

WRAS Approved (UK)

The "Hansen True Fit" range of black plastic threaded fittings holds WRAS (Water Regulations Approval Scheme) approval number 251102715, valid 1 November 2025 to 30 November 2030. WRAS approval shows a fitting complies with the UK water fittings regulations for use on drinking water supplies.

Delivery or Collection

Stock Sizes 15mm–50mm are stocked in store. We hold limited stock of other sizes, and can order them in if needed.
Delivery Courier nationwide. Shipping is calculated at checkout based on your location.
Collections Available from 21 Akatea Road, Glendene, Auckland.

How to Choose & Measure Your Thread

Hansen sizes are nominal BSP sizes, not the measured diameter of the pipe or thread. A "15mm" thread is a 1/2" BSP thread, and it measures about 21mm across the outside of the male thread.

Step 1: Check both male threads are the same size

A hex socket joins two male threads of the same size (e.g. two 1" male pipe threads). If the two male threads are different sizes, use a Hansen Reducing Hex Socket (HSRS) instead.

Step 2: Measure the male thread

Measure across the outside of the male thread, near its end, and match it to the table below.

Step 3: Pick the code

The code is simply HSS plus the size in mm: 25mm (1") = HSS25, 1/2" = HSS15.

BSP Size Hansen mm Male Thread OD (approx.) Threads per Inch
1/2" 15mm 21.0mm 14
3/4" 20mm 26.4mm 14
1" 25mm 33.2mm 11
1 1/4" 32mm 41.9mm 11
1 1/2" 40mm 47.8mm 11
2" 50mm 59.6mm 11
2 1/2" 65mm 75.2mm 11
3" 80mm 87.9mm 11
4" 100mm 113.0mm 11

Male thread outside diameters and threads per inch are the standard BSP (ISO 7) values, rounded. Tapered BSPT threads seal on the taper, so measure near the end of the thread.

Installation in Brief

  • Seal every thread: Use a non-hardening thread sealant that is compatible with plastic (Hansen recommends Loctite 5331) or PTFE thread tape
  • Hand tight + 1 to 2 turns: Tighten until firm with a spanner on the hex — no more. Do not over-tighten
  • Support your pipework: All pipe work must be adequately supported
  • Metal fittings: Hansen True Fit fittings can be used with metal fittings

Hansen's Threaded Fitting Handy Tips: how to apply thread tape and tighten True Fit fittings.

Full step-by-step guide: Hansen threaded fitting installation guide.

Full Size & Dimension Table — All 9 Hansen Hex Sockets

T1 and T2 are the two female threads, one in each end. They are the same size and both are BSPT tapered threads. Dimensions are from Hansen's HSS drawing: hex size (a) and overall length (b), in mm. Choose the code from the Size drop-down above.

Reading the drawing:

  • a: hex size (the spanner size)
  • b: overall length
  • T1, T2: BSPT female threads, one in each end
Hansen Hex Socket HSS dimension drawing showing hex size (a), overall length (b) and BSPT female threads (T1, T2)
Hansen Code Metric Size Imperial Size Thread (T1 & T2) Hex Size a (mm) Length (mm) Max Pressure @ 20°C
BSPT female, both ends
HSS15 15mm 1/2" 1/2" 28 41.5 16 bar
HSS20 20mm 3/4" 3/4" 34 43.5 16 bar
HSS25 25mm 1" 1" 41 47.5 16 bar
HSS32 32mm 1 1/4" 1 1/4" 51.5 51.5 16 bar
HSS40 40mm 1 1/2" 1 1/2" 58 55 16 bar
HSS50 50mm 2" 2" 72 61.5 16 bar
HSS65 65mm 2 1/2" 2 1/2" 92.5 68 12 bar
HSS80 80mm 3" 3" 110 74 10 bar
HSS100 100mm 4" 4" 137.5 87.5 10 bar

Chemical Compatibility

Using your fittings with anything other than water? Check Hansen's chemical resistance chart for True Fit threaded fittings before you install. Pool and spa chlorine, bleach, strong acids and oxidising agents all attack the material.

View Chemical Compatibility Chart

Installation Guide

Step-by-step thread sealing and tightening, do's and don'ts, and how to pressure test a new Hansen threaded joint, with Hansen's handy tips video.

View Installation Guide

Frequently Asked Questions

What size hex socket do I need to join two 25mm (1") male threads?

You need the Hansen HSS25. It has a 1" (25mm) BSPT female thread in each end, so both 1" male threads screw into it. Hansen's drawing gives it a hex size (a) of 41mm and a length of 47.5mm, and it is rated to 16 bar at 20°C. The code is HSS plus the thread size in mm, so 1/2" is HSS15, 2" is HSS50 and 4" is HSS100.

Hex socket, reducing hex socket or hex nipple: which do I need?

A Hansen hex socket (HSS) is female in both ends and joins two male threads of the same size. If the two male threads are different sizes, use a Hansen Reducing Hex Socket (HSRS). To join two female threads, use a Hex Nipple (HSN). To step a female thread down to a smaller female thread, use a Reducing Bush (HRB).

Is a Hansen hex socket safe for drinking water?

Yes. Hansen True Fit threaded fittings are made from a raw material approved for potable (drinkable) water. The range passed AS/NZS 4020:2018 testing for products in contact with drinking water (Australian Water Quality Centre report 356792, 2023), and the True Fit range holds UK WRAS approval number 251102715, valid to 30 November 2030. Hansen notes the material is suitable for domestic water, not pool or spa water.

Do I need thread tape on nylon fittings?

Yes. Hansen says to use a thread sealant on all threaded connections, even though the threads are tapered. Use either a thread sealing paste or PTFE (Teflon) tape. Hansen recommends Loctite 5331. The right sealant is non-hardening, compatible with plastic, and doesn't add slipperiness that encourages over-tightening. Wrap tape clockwise when looking at the end of the male thread, starting just back from the first thread.

How tight should I tighten a Hansen threaded fitting?

Hand tight plus one to two turns, and no more. Screw the fitting in by hand until it is firm, then use a spanner or pipe grip on the hex for one to two more turns. Hansen is clear on this: do not over-tighten. Hansen's handy tips video makes the same point: the aim is a good seal, not maximum tightness.

What pressure is a Hansen hex socket rated to?

At 20°C, Hansen rates True Fit threaded fittings at 16 bar (1,600 kPa) for sizes from 6mm to 50mm, 12 bar (1,200 kPa) for 65mm, and 10 bar (1,000 kPa) for 80mm to 100mm. Pressure ratings fall as temperature rises. At 60°C, Hansen's graph shows about 8, 6 and 5 bar respectively. The ratings apply to water only, with the fitting installed to Hansen's specifications.

Can I use a Hansen hex socket on hot water?

No. Hansen tests its products for cold water use up to a maximum of 60°C (140°F) and does not recommend use above 60°C, because plastic expands as temperature rises. Fittings that fail above 60°C are not covered by Hansen's Limited Lifetime Warranty — so do not use them on hot water lines that run above 60°C.

Are Hansen hex socket threads BSP or NPT?

Hansen hex sockets are BSPT x BSPT, meaning British Standard Pipe tapered threads in both ends. This is the standard pipe thread used in New Zealand and Australia. BSP and NPT threads have different thread angles and pitches in most sizes, so don't assume an NPT thread will seal in a BSPT fitting.

Does 15mm mean the hex socket fits 15mm pipe?

No. Hansen's mm sizes are nominal BSP thread sizes, not pipe outside diameters. 15mm is a 1/2" BSP thread, and its male thread measures about 21mm across. Likewise, 20mm is 3/4" (about 26.4mm), 25mm is 1" (about 33.2mm) and 50mm is 2" (about 59.6mm). Match the thread, not the pipe, then use the correct pipe fitting for your pipe type.

Can I use Hansen nylon fittings with brass or galvanised fittings?

Yes. Hansen says True Fit fittings can be used with metal fittings. Use a plastic-compatible thread sealant, tighten to hand tight plus one to two turns, and make sure all pipework is properly supported so the nylon fitting is not carrying the weight of metal pipe or valves.

Can I use a Hansen hex socket on a swimming pool or spa?

No. Hansen advises that the high chlorine concentrations in pool and spa water will attack the fitting material. True Fit fittings are only suitable for domestic water, and fittings used on pools or spas are not covered by Hansen's Limited Lifetime Warranty. Their chemical resistance chart also rates bleach, halogens and oxidising agents as bad. See our Hansen chemical compatibility page.

Can Hansen threaded fittings be buried or used under a driveway?

Hansen True Fit fittings are suitable for use above or below ground. However, Hansen does not recommend using any True Fit fittings under driveways, paths or foundations. All pipework must be adequately supported.