SEAL-RUBBER100
$15.00 NZD
All prices include GST
Rubber tank fitting are the best way to connect your tank to PVC pipes, they are available in a range of sizes and with a little bit of lubricant are easy to install. They are also called Wallace seal or uniseal
Drill hole (sizes below) into tank and place seal in hole, with some lubricant and a nicely cut piece of pvc that is de-burred it into the fitting. Job Done...
|
Code |
Suitable for |
Size |
Standard |
Pipe Diameter |
Hole Saw Size |
|
SEAL-WAL-25PRE |
Pressure Pipe |
25mm |
AS/NZ 1477.2 |
33.4 - 33.7mm |
44mm |
|
SEAL-WAL-32DWV |
Drain Waste & Vent |
32mm |
- |
36.2 - 36.5mm |
44mm |
|
SEAL-WAL-40DWV |
Drain Waste & Vent |
40mm |
- |
42.8 - 43.1mm |
52mm |
|
SEAL-WAL-40PRE |
Pressure Pipe |
40mm |
48.1-48.4 |
57mm |
|
|
SEAL-WAL-50DWV |
Drain Waste & Vent |
50mm |
AS/NZS 1260 |
55.7 - 56.0mm |
65mm |
|
SEAL-WAL-50PRE |
Pressure Pipe |
50mm |
60.2-60.5 |
70mm |
|
|
SEAL-WAL-65DWV |
Drain Waste & Vent |
65mm |
AS/NZS 1260 |
68.7 - 69.1mm |
76mm |
|
SEAL-WAL-80DWV |
Drain Waste & Vent |
80mm |
AS/NZS 1260 |
82.3 - 82.7mm |
89mm |
|
SEAL-WAL-90DWV |
Stormwater |
90mm |
AS/NZ 1254 |
90.0 - 90.3mm |
98mm |
|
SEAL-WAL-100DWV |
Stormwater Drain Waste & Vent |
100mm |
Stormwater AS/NZ 1254 Waste & Vent AS/NZ 1260 |
110.0 - 110.4mm |
121mm |
|
SEAL-RUBBER100 |
Stormwater Drain Waste & Vent |
100 |
|
110.0 - 110.4mm |
127mm |
|
SEAL-DWV-150SWV |
Stormwater Drain Waste & Vent |
150mm |
AS/NZS 1260 FDA 21 CFR 177.1500 |
160.0 - 160.5mm |
168mm |
