Search

DAB-JETCOM62NXTP

DAB JET Water Pump - nXt Pro

Pump Body Material
Pump Size

DAB Self Priming Jet Water Pumps with iCON nXt Pro Electronic Pump Controller

Suitable for water supply applications with suction wells, water supply and boosting of domestic systems, agricultural and gardening applications.

  • Designed for domestic household pressure systems
  • Electric pump control with dry run protection and automatic restart
  • Small Pressure tank supplied as part of the controller
  • 2 Year Return to base Warranty

Pump Specifications:

kW Amps Max Head (m) Max Flow (lpm) Taps*
Technopolymer:
DAB-JETCOM62NXTP 0.44 3.12 42  45 4
DAB-JETCOM82NXTP 0.60 3.80 47  60
6
DAB-JETCOM102NXTP 0.75 5.10
53.8  60
6
DAB-JETCOM132NXTP 1.00 6.60
48  80
8
Stainless Steel:
DAB-JINOX82NXTP 0.60
3.80
47
60
6
DAB-JINOX102NXTP 0.75
3.80
53.8
60
6
DAB-JINOX112NXTP 1.00
3.80
61
60
6
DAB-JINOX132NXTP 1.00
3.80
48
80
8

* Taps calculated at 10lpm

Pump Dimensions:

DAB Jetcom Pump Dimensions
A B D
Technopolymer:
DAB-JETCOM62NXTP 410 406 170 144
DAB-JETCOM82NXTP 410 406 170 144
DAB-JETCOM1022NXTP 414 425 170 144
DAB-JETCOM132NXTP 414 425 170 144
Stainless Steel:
DAB-JINOX82NXTP 408
406 174
144
DAB-JINOX102NXTP 408
424
174
144
DAB-JINOX112NXTP 408
424
174
144
DAB-JINOX132NXTP 408
424
174
144
All Pumps Have 25mm Female Inlet and 25mm Male Outlet

Pump Information:

  • Pumps Should be Protected from the elements, Big Water Tanks offers a tidy pump house for this purpose, ventilation and drainage is very important
  • Incoming suction pipework must be a minimum 25mm Internal diameter and Ideally have some flexibility especially on the tank end of the pipework to allow for expansion and contraction of the tank. Suction Pipe Length over 5m in length should be increased to 32mm and over 10m should be 40mm. It should also not allow for any air pockets by going up and down.
  • Suction Lift Pipework should have a non return valve if over 1m of lift, and should be increased to 32mm diameter is over 3m of suction lift and 40mm diameter if suction lift is over 6m with an absolute max suction lift of 9m
  • Pressure Tank is not required if in standard use as we only sell the NXTP version of the controller with a small 0.3l Pressure tank attached however adding a pressure tank will always increase the life of the pump, if using the controller on MODE 2 (setting a cut in and cut out pressure) then a larger pressure tank is required.
  • Priming your pump requires opening the priming port and pouring water in to allow the pump to pump something, this may have to be repeated in suction lifts where the tank has run dry.
  • 2 Year Return to Base Warranty on all DAB pumps

Downloads