DAB Esybox Mini3 Water Pump

Pump Specifications:

* Taps calculated at 10lpm

Pump suitable for up to 3 stories

Pump Dimensions:

EsyBox Mini3
	mm		mm
A	439	B	263
C	46	D	143
E	60.7	F	106.7
G	297.5	H	236
I	40.5	L	152
M	46	N	101.7
P	140	Q	140
R	155.5	S	47.8
T	133	V	54.5
All Pumps Have 25mm Female Inlet and 25mm Male Outlet

Pump Information:

• Better Energy Savings, with variable speed pumps the pump only spins at the required speed to supply its usage instead of a standard style pump that is either on or off... A set point between 1 and 5.5 bars is achievable by settings on the LCD screen
• ULTRA Low Noise - This is one of the lowest noise pumps with only 45 db(A) 
• Onboard controls through the LCD screen
• Pumps Should be Protected from the elements, Big Water Tanks offers a tidy pump house for this purpose, ventilation and drainage is very important
• Incoming suction pipework must be a minimum 25mm Internal diameter and Ideally have some flexibility especially on the tank end of the pipework to allow for expansion and contraction of the tank. Suction Pipe Length over 5m in length should be increased to 32mm and over 10m should be 40mm. It should also not allow for any air pockets by going up and down.
• Suction Lift Pipework should have a non return valve if over 1m of lift, and should be increased to 32mm diameter is over 3m of suction lift and 40mm diameter if suction lift is over 6m with an absolute max suction lift of 8m
• Pressure Tank is not required if in standard use a 1l Pressure tank incorporated into the pump however adding a pressure tank will always increase the life of the pump.
• Priming your pump requires opening the priming port and pouring water in to allow the pump to pump something, this may have to be repeated in suction lifts where the tank has run dry.
• 2 Year Return to Base Warranty on all DAB pumps

Downloads

• DAB Ezybox Mini3 Product Information and Data Sheet
• DAB Ezybox Mini3 Opperation and Installation Manual