BMT-RHML01
$359.00 NZD
All prices include GST
Big Water Tanks stocks the Rain Harvesting Maelstrom® Original pre-tank filter, with a choice of plastic cage or stainless steel Shark Cage. It filters roof water down to 180 microns before it reaches your tank. 100mm flexible couplings; codes RHML01 (plastic cage) and RHML02 (Shark Cage).
Rain Harvesting says: "The Maelstrom® Filter's advanced design combines super-fine filtration and super-high water catchment efficiency to give you cleaner rainwater and more of it. The unique U-shaped, twin stage filter keeps even the tiniest debris out of your tank while allowing massive volumes of water to flow through. The Maelstrom® range are the ultimate solutions for pre-tank filtration." Choose the cage that suits your site using the comparison below.
Both options use the same Maelstrom® Original body, mounting plate and 100mm couplings. The difference is the filter cage inside. Rain Harvesting: "The Shark Cage Filter is the step up from the Maelstrom® Original – it's incredibly easy to clean and handles higher flow rates of water – which means more water in your tank."
| Plastic Cage (RHML01) | Steel Shark Cage (RHML02) | |
|---|---|---|
| Filter | Twin stage: a curved Primary Filter inside a nylon mesh Secondary Filter | Single skin stainless steel mesh Shark Cage |
| Filtration | Secondary Filter catches fine particulates larger than 180 micron | 180 micron filter |
| Leaves and debris | The initial 2mm filter diverts leaves and debris, which are then flushed out during rainfall events | Incoming water pushes debris to the side; as debris loads build, the cage starts to self-eject leaves |
| Water catchment | Up to 96% at 10L/second (2.5Gal/sec); 96% at 3,600 litres/hour in wet systems | "Even more efficient water capture than a standard Maelstrom®"; handles higher flow rates |
| Cleaning | Lift out the filter, release the four handle clips, slide off the handle, remove the Secondary Filter and hose it out | Lift out by the handle, scoop out large debris by hand, then hose out the Shark Cage |
| In the box | Maelstrom® filter and 3 flexible couplings (two on the Maelstrom®, one in the box) | Maelstrom® filter with Shark Cage and 3 flexible couplings (two on the Maelstrom®, one in the box) |
| Size and fittings | Same body and dimensions (see Specifications) | Same body and dimensions (see Specifications) |
From Rain Harvesting's NZ product pages and Rain Harvesting's Maelstrom® Original Installation and Specification Guides (plastic cage and Shark Cage). Not sure which suits your roof? ask us.
Rain Harvesting: "For best performance, check and maintain your Maelstrom® on a regular basis." How often depends on where it is installed; high debris areas need more regular maintenance than low debris areas. Inspect the filter after the first rainfall event and plan your schedule from that.
Plastic Cage:
Steel Shark Cage:
From Rain Harvesting's Maelstrom® Original Installation and Specification Guides (plastic cage and Shark Cage).
Plastic Cage (RHML01):
Steel Shark Cage (RHML02):
You may also need: a screwdriver, 6 screws for mounting to your tank, utility knife, marker pen, tape measure, brackets (wall or in-tank mount), a drill and hole saw (pit or in-tank mount) and a 600mm stormwater pit (pit mount).
From Rain Harvesting's Maelstrom® Original Installation and Specification Guides (plastic cage and Shark Cage).
The Maelstrom® sits at the inlet of your tank, so cleaner water goes in and less sediment ends up in the bottom. Pair it with one of our Big Water Tanks water tanks. For first flush diversion, see the First Flush Carrot and Total Rain, or browse the rest of our Rain Harvesting range.
Plastic Cage, from Rain Harvesting's guide:

Steel Shark Cage:
Rain Harvesting: "The Maelstrom® Original with Shark Cage Filter delivers massive amounts of water to your tank. The single skin Shark Cage uses super-fine filtration to block leaves and debris, keeping your water clean."
"The single skin, stainless steel cage, allows debris to be pushed to the side so you catch as much water as possible." When debris loads start to build, the Shark Cage starts to self-eject leaves from the filter.

Letters and labels from the diagrams in Rain Harvesting's Maelstrom® Original Installation and Specification Guides (plastic cage and Shark Cage).
The waste outlet takes leaves and debris away. Rain Harvesting recommends, where practical, plumbing it so it directs excess water and debris to stormwater. Alternatively, cap the waste outlet with a vented flap valve.

Straight waste outlet allows the best self-cleaning efficiency and great water catchment.

Raised waste outlet allows the best water catchment and great self-cleaning efficiency.

Raised waste outlet with a flap valve allows the best water catchment and great self-cleaning efficiency without the need to plumb a dedicated waste pipe.
Overflow options from Rain Harvesting's Maelstrom® Original Installation and Specification Guides (plastic cage and Shark Cage).
| Connection | Fitting | Notes |
|---|---|---|
| Inlet and waste outlet ports | 100 F with flex coupling (4" flex coupling) | The symmetric U-bend works equally well in either direction, so use whichever port suits as the inlet and the other as the waste outlet |
| Filtered water outlet (F) | 100 F with flex coupling (4" flex coupling) | For tank top and in-tank mounts you can remove the coupling, or cut away the outlet in the cut channel provided for a larger outlet |
| Tank hole size | 228 to 482mm | Trim the mounting plate in its channels to the nearest size, using your old tank screen as a guide |
Rain Harvesting recommends the larger cut-away outlet if your system is designed to harvest 100% of your roof catchment area, or if you're in an area with high peak flows during rain events.
F = female / socket fitting. Fittings from Rain Harvesting's Maelstrom® Original Installation and Specification Guides (plastic cage and Shark Cage). If you're not sure what your pipework needs, ask us before you cut any pipe.
The Maelstrom® can be mounted on the tank top, on a wall, inside a tank riser or in a 600mm (24") stormwater pit. The steps below are Rain Harvesting's tank top mount; the guides cover every orientation.




1Pick your ports
Decide which port on the Maelstrom®'s symmetric U-bend is the water inlet and which is the waste outlet. The filter works equally well in either direction.
2Remove the old screen
Unscrew and pull the existing tank screen out and off the tank opening.
3Trim the mounting plate
Snap the Maelstrom® out of the mounting plate. Turn the plate upside down and, using the removed tank screen as a guide, trim to the nearest size by cutting in the channel. Make sure the screw points will still let you screw through the plate into the tank top for a mosquito-proof seal.
4Fix the plate
Centre the mounting plate over the tank inlet and screw it to the tank top.
5Set the outlet
Remove the 100mm flexible coupling from the filtered water outlet (F), or cut the outlet away in the cut channel for a larger outlet (recommended for 100% roof catchment or high peak flows).
6Snap in the filter
Snap the Maelstrom® in place through the opening in the mounting plate.
7Connect the inlet
Loosen the hose clamp on your inlet port, measure and cut your inlet pipe to fit, then tighten the clamp.
8Connect the waste outlet
Loosen the hose clamp on the waste outlet port. Where practical, plumb it to stormwater, or cap it with a vented flap valve. Cut and fit the outlet pipe and tighten the clamp.
Other orientations, from the guides:
Steps and figures from Rain Harvesting's Maelstrom® Original Installation and Specification Guides (plastic cage and Shark Cage). Download the full guide below before you start.
| Code | Cage | Tank Hole | A | B | C | D | E | F | G |
|---|---|---|---|---|---|---|---|---|---|
| RHML01 | Plastic | 228-482 | 100 F with flex coupling | 140 | 272 | 120 | 158 | 533 | 505 (can be cut down) |
| RHML02 | Shark (steel) | 228-482 | 100 F with flex coupling | 140 | 272 | 120 | 158 | 533 | 505 (can be cut down) |
All dimensions in mm, from Rain Harvesting's Maelstrom® Original Installation and Specification Guides (plastic cage and Shark Cage); both guides list the same figures. F = female / socket fitting.


The installation guides are published by Rain Harvesting by Blue Mountain Co.
Maelstrom Original w/ Plastic Cage - Overview
Maelstrom Original w/ Shark Cage - Overview
Maelstrom
Maelstrom Filter Cleaning and Maintenance
Maelstrom Shark Cage Filter Cleaning
Official videos from Rain Harvesting's YouTube channel.
Both filter to 180 microns in the same body. The plastic cage is a twin stage filter with a nylon mesh secondary filter. Rain Harvesting calls the stainless steel Shark Cage "the step up": it is easier to clean, handles higher flow rates and starts to self-eject leaves as debris builds up.
The inlet, waste outlet and filtered water outlet are 100 F with flex coupling (4" flex coupling). Three flexible couplings come in the box.
Down to 180 microns. Rain Harvesting says that is five times smaller than standard tank screen.
On the tank top, on a wall, inside a tank riser, or in a 600mm (24") stormwater pit. The installation guides show each one.
Out the waste outlet. Where practical, Rain Harvesting recommends plumbing it to stormwater; or cap it with a vented flap valve.
It depends on your site; high debris areas need more regular maintenance. Rain Harvesting recommends inspecting the filter after the first rainfall event and planning your schedule from there.
Rain Harvesting lists a tank hole size of 228 to 482mm. The mounting plate is trimmed in its channels to suit, using your old tank screen as a guide.