Search

HAN-HMDIDE15

Hansen MDID Elbows

$19.45 NZD
All prices include GST

Configuration

Elbow

Female Elbow

Male Elbow

Hansen Products have added MDID Elbows (Elbows, Male and Female Elbows), the newest range of Easy Fit ID Fittings, these are make site installations far easier as they can externally seal Alkathene Pipe (Low Density Polyethylene Pipe), HD Pipe (High Density Polyethylene Pipe) and with the standard MDPE (Medium Density Polyethylene Pipe, Blue Pipe) Internals the fittings can be used to connect two types of pipes together.

Description
Product Selection
Pipe Size Specifications

Easy Fit ID compression Fittings Features and Benefits

Fits the Following Pipes:

Alkathene Pipe 15mm, 20mm, 25mm, 32mm and 40mm (not 50mm)
HDPE Pipe ( Not Common ) 15mm, 20mm, 25mm, 32mm, 40mm and 50mm
MDPE Pipes (with MDPE Adapters or MDID Adapters from MDPE fittings) 16mm to 110mm

Manufactured in New Zealand using best quality materials to withstand the harshest weather conditions
One piece fitting captive components when fitting assembled correctly
Seal is pre-lubricated for easy pipe insertion and reliable leak free connections
UV stabilized high quality virgin polypropylene giving weather, termite, fungi and bacterial resistance
High pressure rated (235 psi/16 Bar)
Sleek, compact design for easy installation
Easy grip nuts for rapid winding onto body
Dependable high quality threaded Components
Potable (drinking) water approved
Fits standard NZS 7601:1978 Type 3 pipe (LDPE) and standard NZS 7602:1977 Type 5 class C & D
pipe (HDPE).

Easy Fit ID Compression Fittings Parts and Materials

Nuts & Body: High quality Polypropylene (Virgin PP)
Grip Ring: High quality Acetal (Virgin POM)
Thrust Ring: High quality Polypropylene (PP)
Seal: High quality EPDM

Easy Fit ID Compression Fittings Maximum Working Pressure

15mm to 50mm:16 bar @ 20 degrees Celsius

Easy Fit ID Compression Fittings Pipe Specifications

Hansen Easy Fit ID Compression Fittings are designed for High Density pipe (AS/NZS 7602:1977 Type 5 class C & D) and Low
Density Polyethylene Pipe (AS/NZS 7601:1978 Type 3 pipe). Hansen Easy Fit ID Compression Fittings will fit Medium Density
Pipe (AS/NZS 4130:2009) when a MD Conversion Kit is used.
Fitting sizes 15mm (1/2”) to 50mm (2”) are pressure rated to 16bar at 20° Celsius.
Fittings will fit the following pipe:

15mm to 40mm LDPE
15mm to 50mm HDPE
16mm to 110mm MDPE (When an MD Conversion Kit is used on an MDPE fitting)

Product Selection Details

Elbows
	Port 1	Port 2
HMDIDE15	15mm LD/HD	15mm LD/HD
HMDIDE20	20mm LD/HD	20mm LD/HD
HMDIDE25	25mm LD/HD	25mm LD/HD
HMDIDE32	32mm LD/HD	32mm LD/HD
HMDIDE40	40mm LD/HD	40mm LD/HD
HMDIDE50	50mm HD	50mm HD

Female Elbows
	Port 1	Port 2
HMDIDFE15	15mm LD/HD	15mm BSPT (F) - 1/2"
HMDIDFE20	20mm LD/HD	20mm BSPT (F) - 3/4"
HMDIDFE25	25mm LD/HD	25mm BSPT (F) - 1"
HMDIDFE32	32mm LD/HD	32mm BSPT (F) - 1-1/4"
HMDIDFE40	40mm LD/HD	40mm BSPT (F) - 1-1/2"
HMDIDFE50	50mm HD	50mm BSPT (F) - 2"

Male Elbows
	Port 1	Port 2
HMDIDME15	15mm LD/HD	15mm BSPT (M) - 1/2"
HMDIDME20	20mm LD/HD	20mm BSPT (M) - 3/4"
HMDIDME25	25mm LD/HD	25mm BSPT (M) - 1"

Product selection

This product range is "small" but very large as you can adapt MDPE fittings using a MDID Adapter Kit

Please note that LD and HD fittings require a one size bigger fitting from MDPE fitting sizes to adapt to MDID Fittings

MDPE Comparison Fittings
MDPE Fitting Size	LDPE (Alkathene) Adapter Size	HDPE Adapter Size
Measured Pipe OD	Measured Pipe ID
20mm	15mm	15mm
25mm	20mm	20mm
32mm	25mm	25mm
40mm	32mm	32mm
50mm	40mm	40mm
63mm	n/a	50mm
75mm	n/a	n/a
90mm	n/a	n/a
110mm	n/a	n/a

Example 1 - Reducing Alkathene (LDPE) Pipes

You have a 32mm Alkathene Pipe and you want to Tee off to a 25mm Alkathene Pipe.

Solution 1: is to use a Hansen Poly Reducing Tee Connector HAN-HRT3225

Solution 2: is to use a Hansen MDPE Reducing Tee Connector HAN-HMDRT4032 then adding 2 x HAN-HMDIDCK32 to convert the 40mm MDPE fitting to 32mm LDPE and one HAN-HMDIDCK25 to convert the 32mm MDPE fitting to 25mm LDPE

Example 2 - Alkathene (LDPE) Hose Tap MDID

You have a 20mm Alkathene Pipe and you want to put a Bracket Mounted Elbow which is not part of the "small" range of MDID fittings.

Solution: Purchase an HAN-HMDRBE2515 then purchase a HAN-HMDIDCK20 to convert the 25mm MDPE fitting to 20mm LDPE

Example 3 - Connect 32mm Alkathene (LDPE) to 32mm HDPE

You have an existing HDPE pipe and you want to extend the pipe in a more common Alkathene 32mm LDPE pipe

Solution: Purchase a HAN-HMDIDC32 these pipe sizes are the same except for 50mm Alkathene that is not supported in this solution, see the Pipe Size Specification.

Example 4 - Tee off a existing 50mm MDPE to new 32mm Alkathene (LDPE) Pipe

You have an existing 50mm MDPE pipe and you want to Break into and Tee off an Alkathene 32mm LDPE pipe

Solution: Purchase a HAN-HMDRT5040 and purchase a HAN-HMDIDCK32 replace the internals of the 40mm Tee branch with the 32mm MDID Adapter.

Please NOTE:

Please select these items carefully, we have tried to define them as best we can, there are lots of different pipe sizes, lots of different types of fittings, we cannot assist you with selection over the phone as we cannot see the pipes you are connecting, even looking at them in "real life" can be hard to determine which pipe size it is. Please be aware we may charge a restocking fee if you select the wrong items.

LDPE Pipe- Low Density Polyethylene Pipe (Alkathene)

Standard NZS 7601:1978 (New Zealand) Polyethylene Pipe (Type 3) For Cold Water Services
Nominal Bore	Inside Diameter		Outside Diameter		Wall Thickness		Working Pressure
	Min mm	Max mm	Min mm	Max mm	Min mm	Max mm	Kpa	psi
15mm	11.7	12.7	16.9	17.3	2.3	2.6	900	130.50
20mm	17.9	19.2	24.9	25.4	3.1	3.5	800	116.00
25mm	24.2	25.6	31.2	31.8	3.1	3.5	650	94.25
32mm	30.5	31.9	37.5	38.1	3.1	3.5	500	72.50
40mm	36.8	38.3	43.8	44.5	3.1	3.5	450	65.25
50mm	49.5	51.0	56.5	57.2	3.1	3.5	350	50.75

HD Pipe - High Density Polyethylene Pipe - Class C (Not Common)

Standard NZS 7602:1977 (New Zealand) Polyethylene Pipe (Type 5) For Cold Water Services - Class C
Nominal Bore	Inside Diameter		Outside Diameter		Wall Thickness		Working Pressure
	Min mm	Max mm	Min mm	Max mm	Min mm	Max mm	Kpa	psi
15mm	13.5	14.3	16.9	17.3	1.5	1.7	900	130.50
20mm	20.3	21.2	24.9	25.4	2.1	2.3	900	130.50
25mm	25.2	26.4	31.2	31.8	2.7	3.0	900	130.50
32mm	30.5	31.6	37.5	38.0	3.2	3.5	900	130.50
40mm	35.6	37.1	43.8	44.5	3.7	4.1	900	130.50
50mm	48.8	50.6	60.0	60.8	5.1	5.6	900	130.50

HD Pipe - High Density Polyethylene Pipe - Class D (Not Common)

Standard NZS 7602:1977 (New Zealand) Polyethylene Pipe (Type 5) For Cold Water Services - Class D
Nominal Bore	Inside Diameter		Outside Diameter		Wall Thickness		Working Pressure
	Min mm	Max mm	Min mm	Max mm	Min mm	Max mm	Kpa	psi
15mm	12.7	13.5	16.9	17.3	1.9	2.1	1200	174.00
20mm	18.7	19.8	24.9	25.4	2.8	3.1	1200	174.00
25mm	23.6	24.8	31.2	31.8	3.5	3.8	1200	174.00
32mm	28.5	29.8	37.5	38.0	4.1	4.5	1200	174.00
40mm	33.2	34.9	43.8	44.5	4.8	5.3	1200	174.00
50mm	45.6	47.6	60.0	60.8	6.6	7.2	1200	174.00

MDPE Pipe - High Density Polyethylene Pipe - Class C (Not Common)

Standard NZS 7602:1977 (New Zealand) Polyethylene Pipe (Type 5) For Cold Water Services - Class C
Nominal Bore	Inside Diameter		Outside Diameter		Wall Thickness		Working Pressure
	Min mm	Max mm	Min mm	Max mm	Min mm	Max mm	Kpa	psi
20mm	15.6	16.5	20.0	20.3	1.9	2.2	1250	181.30
25mm	19.6	20.7	25.0	25.3	2.3	2.7	1250	181.30
32mm	25.4	26.5	32.0	32.3	2.9	3.3	1250	181.30
40mm	31.6	33.0	40.0	40.4	3.7	4.2	1250	181.30
50mm	39.6	41.3	50.0	50.5	4.6	5.2	1250	181.30
63mm	50.0	52.0	63.0	63.6	5.8	6.5	1250	181.30
75mm	59.8	62.1	75.0	75.7	6.8	7.6	1250	181.30
90mm	71.6	74.5	90.0	90.9	8.2	9.2	1250	181.30
110mm	87.8	91.0	110.0	111.0	10.0	11.1	1250	181.30