Call us: 0800 Big Water or 09 390 2209

Visit us: 21 Akatea Road, Glendene, Auckland

Search

Commonly searched:
Previous
Hansen MDID Grip Ring
Hansen MDID Seal
Hansen MDID Thrust Ring
Hansen MDID Seal Washer
Hansen MDID Pipe Bush
Hansen MDID Nut

HAN-HMDIDTR15

Hansen MDID Spares

$0.95 NZD
All prices include GST

Size
Part

Hansen Products have added MDID Conversion Kits, the newest range of Easy Fit ID Fittings, these are make site installations far easier as they can externally seal Alkathene Pipe (Low Density Polyethylene Pipe), HD Pipe (High Density Polyethylene Pipe) and with the standard MDPE (Medium Density Polyethylene Pipe, Blue Pipe) Internals the fittings can be used to connect two types of pipes together.

  • Easy Fit ID compression Fittings Features and Benefits

    • Fits the Following Pipes:
      • Alkathene Pipe 15mm, 20mm, 25mm, 32mm and 40mm (not 50mm)
      • HDPE Pipe ( Not Common ) 15mm, 20mm, 25mm, 32mm, 40mm and 50mm
      • MDPE Pipes (with MDPE Adapters or MDID Adapters from MDPE fittings) 16mm to 110mm
    • Manufactured in New Zealand using best quality materials to withstand the harshest weather conditions
    • One piece fitting captive components when fitting assembled correctly
    • Seal is pre-lubricated for easy pipe insertion and reliable leak free connections
    • UV stabilized high quality virgin polypropylene giving weather, termite, fungi and bacterial resistance
    • High pressure rated (235 psi/16 Bar)
    • Sleek, compact design for easy installation
    • Easy grip nuts for rapid winding onto body
    • Dependable high quality threaded Components
    • Potable (drinking) water approved
    • Fits standard NZS 7601:1978 Type 3 pipe (LDPE) and standard NZS 7602:1977 Type 5 class C & D
    • pipe (HDPE).

     

     Easy Fit ID Compression Fittings Parts and Materials

    • Nuts & Body: High quality Polypropylene (Virgin PP)
    • Grip Ring: High quality Acetal (Virgin POM)
    • Thrust Ring: High quality Polypropylene (PP)
    • Seal: High quality EPDM

    Easy Fit ID Compression Fittings Maximum Working Pressure

    • 15mm to 50mm:16 bar @ 20 degrees Celsius

    Easy Fit ID Compression Fittings Pipe Specifications

    • Hansen Easy Fit ID Compression Fittings are designed for High Density pipe (AS/NZS 7602:1977 Type 5 class C & D) and Low
    • Density Polyethylene Pipe (AS/NZS 7601:1978 Type 3 pipe). Hansen Easy Fit ID Compression Fittings will fit Medium Density
    • Pipe (AS/NZS 4130:2009) when a MD Conversion Kit is used.
    • Fitting sizes 15mm (1/2”) to 50mm (2”) are pressure rated to 16bar at 20° Celsius.
    • Fittings will fit the following pipe:
      • 15mm to 40mm LDPE
      • 15mm to 50mm HDPE
      • 16mm to 110mm MDPE (When an MD Conversion Kit is used on an MDPE fitting)






  • Product selection

    This product range is "small" but very large as you can adapt MDPE fittings using a MDID Adapter Kit

     Please note that LD and HD fittings require a one size bigger fitting from MDPE fitting sizes to adapt to MDID Fittings

    MDPE Comparison Fittings
    MDPE Fitting Size LDPE (Alkathene) Adapter Size HDPE Adapter Size
    Measured Pipe OD Measured Pipe ID
    20mm 15mm 15mm
    25mm 20mm 20mm
    32mm 25mm 25mm
    40mm 32mm 32mm
    50mm 40mm 40mm
    63mm n/a 50mm
    75mm n/a n/a
    90mm n/a n/a
    110mm n/a n/a

     

     Example 1 - Reducing Alkathene (LDPE) Pipes

    You have a 32mm Alkathene Pipe and you want to Tee off to a 25mm Alkathene Pipe.

    Solution 1: is to use a Hansen Poly Reducing Tee Connector HAN-HRT3225 

    Solution 2: is to use a Hansen MDPE Reducing Tee Connector HAN-HMDRT4032 then adding 2 x HAN-HMDIDCK32 to convert the 40mm MDPE fitting to 32mm LDPE and one HAN-HMDIDCK25 to convert the 32mm MDPE fitting to 25mm LDPE

    Example 2 - Alkathene (LDPE) Hose Tap MDID

    You have a 20mm Alkathene Pipe and you want to put a Bracket Mounted Elbow which is not part of the "small" range of MDID fittings.

    Solution: Purchase an HAN-HMDRBE2515 then purchase a HAN-HMDIDCK20 to convert the 25mm MDPE fitting to 20mm LDPE

    Example 3 - Connect 32mm Alkathene (LDPE) to 32mm HDPE

    You have an existing HDPE pipe and you want to extend the pipe in a more common Alkathene 32mm LDPE pipe

    Solution: Purchase a HAN-HMDIDC32 these pipe sizes are the same except for 50mm Alkathene that is not supported in this solution, see the Pipe Size Specification.

    Example 4 - Tee off a existing 50mm MDPE to new 32mm Alkathene (LDPE) Pipe

    You have an existing 50mm MDPE pipe and you want to Break into and Tee off an  Alkathene 32mm LDPE pipe 

    Solution: Purchase a HAN-HMDRT5040 and purchase a HAN-HMDIDCK32 replace the internals of the 40mm Tee branch with the 32mm MDID Adapter.

     

    Please NOTE:

    Please select these items carefully, we have tried to define them as best we can, there are lots of different pipe sizes, lots of different types of fittings, we cannot assist you with selection over the phone as we cannot see the pipes you are connecting, even looking at them in "real life" can be hard to determine which pipe size it is. Please be aware we may charge a restocking fee if you select the wrong items.

  • LDPE Pipe- Low Density Polyethylene Pipe (Alkathene)

    Standard NZS 7601:1978 (New Zealand) Polyethylene Pipe (Type 3) For Cold Water Services
    Nominal Bore Inside Diameter Outside Diameter Wall Thickness Working Pressure
      Min mm Max mm Min mm Max mm Min mm Max mm Kpa psi
    15mm 11.7 12.7 16.9 17.3 2.3 2.6 900 130.50
    20mm 17.9 19.2 24.9 25.4 3.1 3.5 800 116.00
    25mm 24.2 25.6 31.2 31.8 3.1 3.5 650 94.25
    32mm 30.5 31.9 37.5 38.1 3.1 3.5 500 72.50
    40mm 36.8 38.3 43.8 44.5 3.1 3.5 450 65.25
    50mm 49.5 51.0 56.5 57.2 3.1 3.5 350 50.75

     

    HD Pipe - High Density Polyethylene Pipe - Class C (Not Common)

    Standard NZS 7602:1977 (New Zealand) Polyethylene Pipe (Type 5) For Cold Water Services - Class C
    Nominal Bore Inside Diameter Outside Diameter Wall Thickness Working Pressure
      Min mm Max mm Min mm Max mm Min mm Max mm Kpa psi
    15mm 13.5 14.3 16.9 17.3 1.5 1.7 900 130.50
    20mm 20.3 21.2 24.9 25.4 2.1 2.3 900 130.50
    25mm 25.2 26.4 31.2 31.8 2.7 3.0 900 130.50
    32mm 30.5 31.6 37.5 38.0 3.2 3.5 900 130.50
    40mm 35.6 37.1 43.8 44.5 3.7 4.1 900 130.50
    50mm 48.8 50.6 60.0 60.8 5.1 5.6 900 130.50

    HD Pipe - High Density Polyethylene Pipe - Class D (Not Common)

    Standard NZS 7602:1977 (New Zealand) Polyethylene Pipe (Type 5) For Cold Water Services - Class D
    Nominal Bore Inside Diameter Outside Diameter Wall Thickness Working Pressure
      Min mm Max mm Min mm Max mm Min mm Max mm Kpa psi
    15mm 12.7 13.5 16.9 17.3 1.9 2.1 1200 174.00
    20mm 18.7 19.8 24.9 25.4 2.8 3.1 1200 174.00
    25mm 23.6 24.8 31.2 31.8 3.5 3.8 1200 174.00
    32mm 28.5 29.8 37.5 38.0 4.1 4.5 1200 174.00
    40mm 33.2 34.9 43.8 44.5 4.8 5.3 1200 174.00
    50mm 45.6 47.6 60.0 60.8 6.6 7.2 1200 174.00


    MDPE Pipe - High Density Polyethylene Pipe - Class C (Not Common)

    Standard NZS 7602:1977 (New Zealand) Polyethylene Pipe (Type 5) For Cold Water Services - Class C
    Nominal Bore Inside Diameter Outside Diameter Wall Thickness Working Pressure
      Min mm Max mm Min mm Max mm Min mm Max mm Kpa psi
    20mm 15.6 16.5 20.0 20.3 1.9 2.2 1250 181.30
    25mm 19.6 20.7 25.0 25.3 2.3 2.7 1250 181.30
    32mm 25.4 26.5 32.0 32.3 2.9 3.3 1250 181.30
    40mm 31.6 33.0 40.0 40.4 3.7 4.2 1250 181.30
    50mm 39.6 41.3 50.0 50.5 4.6 5.2 1250 181.30
    63mm 50.0 52.0 63.0 63.6 5.8 6.5 1250 181.30
    75mm 59.8 62.1 75.0 75.7 6.8 7.6 1250 181.30
    90mm 71.6 74.5 90.0 90.9 8.2 9.2 1250 181.30
    110mm 87.8 91.0 110.0 111.0 10.0 11.1 1250 181.30

You may also like