Hansen Female Threaded Tee Connector Coupling Compression (MD PIPE)

Hansen Female Threaded Tee Connector Coupling Compression

• Description
• Specs
• Instructions
• FAQ

• 

  Available in a range of sizes 

  Product code	Size	Max Pressure @ 20℃
  HMDFT2015	20mm x 1/2”	16 Bar
  HMDFT2020	20mm x 3/4”	16 Bar
  HMDFT2515	25mm x 1/2”	16 Bar
  HMDFT2520	25mm x 3/4”	16 Bar
  HMDFT2525	25mm x 1”	16 Bar
  HMDFT3215	32mm x 1/2”	16 Bar
  HMDFT3220	32mm x 3/4”	16 Bar
  HMDFT3225	32mm x 1”	16 Bar
  HMDFT3232	32mm x 1 1/4”	16 Bar
  HMDFT4025	40mm x 1”	16 Bar
  HMDFT4032	40mm x 1 1/4”
  HMDFT4040	40mm x 1 1/2”	16 Bar
  HMDFT5032	50mm x 1 1/4”	16 Bar
  HMDFT5040	50mm x 1 1/2”	16 Bar
  HMDFT5050	50mm x 2”	16 Bar
  HMDFT6340	63mm x 1 1/2”	16 Bar
  HMDFT6350	16 Bar
  HMDFT6363	63mm x 2 1/2”	16 Bar
  HMDFT7550	75mm x"	12.5 Bar
  HMDFT7563	75mm x 2 1/2”	12.5 Bar
  HMDFT7575	75mm x 3”	12.5 Bar
  HMDFT9063	90mm x 2 1/2”	12.5 Bar
  HMDFT9075	90mm x 3”	12.5 Bar
  HMDFT110100	110mm x 4”	12.5 Bar

  Best Installed Value

  In the late 1970’s Bert Hansen developed a range of easy to use “cold fit pipe fittings” that revolutionized the way Kiwi farmers joined pipe.
  Adding to the Easy Fit range of pipe fittings, Hansen introduces the new Easy Fit Compression Fittings designed specifically for joining Medium Density polyethylene pipe. Building on 60 years experience in the manufacturing of pipe fittings and valves, the sleek, compact design uses only the very best materials to withstand the harshetions.
  
  Hansen Products knows the importance that pipe fittings play in the performance and control of fluid delivery, flow and pressure within a pipe system. This has seen Hansen Products build a reputation for providing high performance, easy to use, innovative, simple products that provide our customers with “Best Installed Value”.
  
  All Hansen products carry our Limited Lifetime Warranty*
  
  *For more information on our warranty please visit www.hansenproducts.com/legal.htm

• 

  CONVERSION CHART
  12.5 bar	1250 kPa	182 psi
  16 bar	1600 kPa	235 psi
  ------------------	------------------	------------------
  20º Celsius	-	68º Fahrenheit

  Threaded Conversions
  12.5 bar	1250 kPa
  1/2" BSP	15mm
  3/4" BSP	20mm
  1" BSP	25mm
  1 1/4" BSP	32mm
  1 1/2" BSP	40mm
  2" BSP	50mm
  2 1/2" BSP	63mm
  3"	75mm
  4"	100mm

  CHEMICAL RESISTANCE

  CHEMICAL TYPE	RESISTANCE LEVEL
  	GOOD	OK - BUT CHECK FURTHER	BAD - TRY TO AVOID
  Acids Weak			X
  Acids Strong			X
  Organic Acids Weak		X
  Organic Acids Strong			X
  Bases Weak	X
  Bases Strong		X
  Bleach			X
  Automotive Fuel	X
  Automotive Lubricants	X
  Hydraulic Fluids	X
  Solvents		X
  Hydrocarbons	X
  Halogens			X
  Alcohols		X
  Aldehydes			X
  Amines			X
  Esters	X
  Ethers	X
  Ketones		X
  Detergents	X
  Oxidizing Agents			X
  Weak Hydrogen Peroxide		X
  Phenols			X

• Installation Process

  

  
  
  

  Feel free to contact us should you have any questions or need any further information.

  Accessories

  We have a full range of Accessories to add to your water Pump including:  

  • Hansen Fittings
  • Water Tank UV Filtration Systems
  • Gutter Protection
  • Storm Water Fittings

• ▼Can I use this fitting in my house water supply?

  Yes, the Hansen Easy Fit Compression Fittings are potable water approved.

  ◄Will this fitting take over from the existing Hansen fitting?

  No, the Hansen Easy Fit Compression Fittings are only for Medium Density poly pipe. This pipe is known as Metric or MDOD. It is a metric sized poly pipe, manufactured from a medium density material commonly known as PE80 and PE100. The Hansen Easy Fit Poly Fittings are for Low Density poly pipe or similar imperial ID pipe such as Australian Rural B poly pipe.

  ◄Does this fitting carry Hansen’s Limited Lifetime Warranty?

  Yes, all Hansen manufactured products carry our Limited Lifetime Warranty (visit our web site for details)

  ◄Why would I use Hansen Easy Fit Compression Fittings on my property?

  Your question should be ‘why wouldn’t I use Hansen Easy Fit Compression Fittings on my property?” They are manufactured in Whangarei, we have the complete range, it carries our Limited Lifetime Warranty and it also carries the Hansen brand, being the most used and trusted pipe fittings available in New Zealand for over 60 years.

  "#">◄How tight should I tighten my Easy Fit Compression fittings?

  Up to 32mm just tighten hand tight and all sizes above use a spanner to tighten another 1/2 to 1 turns past hand tight. Remember you already have a seal once the pipe is past the O-Ring, all the Nut is doing is compressing the Grip Ring onto the pipe to hold the pipe in place.

  ◄Does the pipe need a chamfer?

  We recommend the end of the pipe is cut square and is chamfered if not using a pipe liner.