Hansen Male Straight Coupling Compression

• Description
• Specs
• Instructions
• FAQ

• 

  Available in a range of sizes 

   

  16 Bar "

  Product code	Size	Max Pressure @ 20℃
  HMDMC2015	20mm x 1/2”	16 Bar
  HMDMC2020	20mm x 3/4”	16 Bar
  HMDMC2520	25mm x 3/4”	16 Bar
  HMDMC2525	25mm x 1”	16 Bar
  HMDMC3215	32mm x 1/2”	16 Bar
  HMDMC3220	32mm x 3/4”	16 Bar
  HMDMC3225	32mm x 1”	16 Bar
  HMDMC3232	32mm x 1 1/4”	16 Bar
  HMDMC3240	32mm x 1 1/2”	16 Bar
  HMDMC4025	40mm x 1”	16 Bar
  HMDMC4032	40mm x 1 1/4”	16 Bar
  HMDMC4040	40mm x 1 1/2”	16 Bar
  HMDMC4050	40mm x 2”	16 Bar
  HMDMC5032
  HMDMC5040	50mm x 1 1/2”	16 Bar
  HMDMC5050	50mm x 2”	16 Bar
  HMDMC6332	63mm x 1 1/4”	16 Bar
  HMDMC6340	63mm x 1 1/2”	16 Bar
  HMDMC6350	63mm x 2”	16 Bar
  HMDMC6363	63mm x 2 1/2”	16 Bar
  HMDMC7550	12.5 Bar
  HMDMC7563	75mm x 2 1/2”	12.5 Bar
  HMDMC7575	75mm x 3”	12.5 Bar
  HMDMC9050	90mm x 2”	12.5 Bar
  HMDMC9063	90mm x 2 1/2”	12.5 Bar
  HMDMC9075	90mm x 3”	12.5 Bar
  HMDMC90100	90mm x 4”	12.5 Bar
  HMDMC11050	110mm x 2”	12.5 Bar
  HMDMC11075	110mm x 3”	12.5 Bar
  HMDMC110100	110mm x 4”	12.5 Bar

  Best Installed Value

  In the late 1970’s Bert Hansen developed a range of easy to use “cold fit pipe fittings” that revolutionized the way Kiwi farmers joined pipe.
  Adding to the Easy Fit range of pipe fittings, Hansen introduces the new Easy Fit Compression Fittings designed specifically for joining Medium DenBuilding on 60 years experience in the manufacturing of pipe fittings and valves, the sleek, compact design uses only the very best materials to withstand the harshest weather conditions.
  
  Hansen Products knows the importance that pipe fittings play in the performance and control of fluid delivery, flow and pressure within a pipe system. This has seen Hansen Products build a reputation for providing high performance, easy to use, innovative, simple products that provide our customers with “Best Installed Value”.
  
  All Hansen products carry our Limited Lifetime Warranty*
  
  *For more information on our warranty please visit www.hansenproducts.com/legal.htm

• 

  Hansen Code	A/B mm	C mm	D mm	G"	H mm	P mm	P1 mm
  HMDMC2015	46.3	77.0	22.3	1/2	14.6	58.2	38.0
  HMDMC2020	46.3	79.6	22.3	3/4	16.9	58.2	38.0
  HMDMC2520	53.4	79.3	26.9	3/4	16.9	58.2	39.7
  HMDMC2525	53.4	82.5	26.9	1	20.4	58.2	39.7
  HMDMC3215	65.0	106.0	34.2	1/2	14.6	86.5	54.0
  HMDMC3220	65.0	93.8	34.2	3/4	16.8	72.0	43.8
  HMDMC3225	65.0	96.1	34.2	1	19.9	71.8	44.0
  HMDMC3232	65.0	112.4	34.2	1-1/4	21.8	86.0	58.2
  HMDMC3240	65.0	112.0	34.2	1-1/2	22.3	73.4	45.9
  HMDMC4025	82.0	108.5	41.9	1	20.0	82.3	49.7
  HMDMC4032	82.0	110.0	41.9	1-1/4	22.0	81.5	49.3
  HMDMC4040	82.0	126.5	41.9	1-1/2	22.7	95.6	63.9
  HMDMC4050	82.0	132.5	41.9	2	27.4	96.0	63.7
  HMDMC5032	97.0	135.0	52.2	1-1/4	22.2	102.2	63.6
  HMDMC5040	97.0	135.0	52.2	1-1/2	21.8	102.6	63.3
  HMDMC5050	97.0	140.0	52.2	2	27.4	105.8	64.8
  HMDMC6332	97.0	160.0	65.2	1-1/4	22.0	125.0	77.0
  HMDMC6340	113.5	160.0	65.2	1-1/2	21.7	125.0	77.0
  HMDMC6350	113.5	160.0	65.2	2	26.4	125.0	76.5
  HMDMC6363	113.5	165.0	65.2	2-1/2	30.2	123.0	74.5
  HMDMC7550	136.0	180.0	76.6	2	27.0	140.5	89.0
  HMDMC7563	136.0	180.0	76.6	2-1/2	30.0	140.5	89.0
  HMDMC7575	136.0	190.0	76.6	3	34.0	142.0	88.0
  HMDMC9050	152.5	210.0	93.0	2	29.0	161.0	100.0
  HMDMC9063	152.5	210.0	93.0	2-1/2	30.8	159.0	100.0
  HMDMC9075	152.5	215.0	93.0	3	33.0	159.0	100.0
  HMDMC90100	182.0	220.0	93.0	4	39.0	159.0	100.0
  HMDMC11050	182.0	230.0	111.5	2	29.0	189.0	116.5
  HMDMC11075	182.0	235.0	111.5	3	33.0	185.5	116.5
  HMDMC110100	182.0	240.0	111.5	4	39.0	185.5	116.5

  CONVERSION CHART
  12.5 bar	1250 kPa	182 psi
  16 bar	1600 kPa	235 psi
  ------------------	------------------	------------------
  20º Celsius	-	68º Fahrenheit

  Threaded Conversions
  12.5 bar	1250 kPa
  1/2" BSP	15mm
  3/4" BSP	20mm
  1" BSP	25mm
  1 1/4" BSP	32mm
  1 1/2" BSP	40mm
  2" BSP	50mm
  2 1/2" BSP	63mm
  3"	75mm
  4"	100mm

  CHEMICAL RESISTANCE

  CHEMICAL TYPE	RESISTANCE LEVEL
  	GOOD	OK - BUT CHECK FURTHER	BAD - TRY TO AVOID
  Acids Weak			X
  Acids Strong			X
  Organic Acids Weak		X
  Organic Acids Strong			X
  Bases Weak	X
  Bases Strong		X
  Bleach			X
  Automotive Fuel	X
  Automotive Lubricants	X
  Hydraulic Fluids	X
  Solvents		X
  Hydrocarbons	X
  Halogens			X
  Alcohols		X
  Aldehydes			X
  Amines			X
  Esters	X
  Ethers	X
  Ketones		X
  Detergents	X
  Oxidizing Agents			X
  Weak Hydrogen Peroxide		X
  Phenols			X

• Installation Process

  EASY TO INSTALL
  
  Reliable leak proof seals are the hallmark of any Hansen fitting and that’s no exception when it comes to the Easy Fit Compression range, the simple steps make installation a breeze.

  1. Cut the pipe with pipe cutters, knife or saw. Ensure the end of the pipe is cut square and is chamfered if not using a pipe liner. Clean burrs from pipe ends and keep the pipe end clean and as free of scratches and imperfections as possible.	2. Undo the Nut to the last thread, do not remove Nut from the Body.
  3. Insert the pipe into the fitting through the Nut, White Grip Ring & Thrust Ring until it meets resistance at the O-Ring. Give the pipe a firm push past the O-Ring all the way until it hits the final stop point.	4. Firmly hand tighten the Nut. Use a pair of Poly Grips for a further half turn past hand tight for final tightening on 40mm fittings and greater.
  The hydraulic seal is created when the pipe passes the O-Ring. Tightening the Nut is to achieve pull out resistance of the pipe.

  
  
  

  Feel free to contact us should you have any questions or need any further information.

  Accessories

  We have a full range of Accessories to add to your water Pump including:  

  • Hansen Fittings
  • Water Tank UV Filtration Systems
  • Gutter Protection
  • Storm Water Fittings

• ◄Can I use this fitting in my house water supply?

  Yes, the Hansen Easy Fit Compression Fittings are potable water approved.

  ◄Will this fitting take over from the existing Hansen fitting?

  No, the Hansen Easy Fit Compression Fittings are only for Medium Density poly pipe. This pipe is known as Metric or MDOD. It is a metric sized poly pipe, manufactured from a medium density material commonly known as PE80 and PE100. The Hansen Easy Fit Poly Fittings are for Low Density poly pipe or similar imperial ID pipe such as Australian Rural B poly pipe.

  ◄Does this fitting carry Hansen’s Limited Lifetime Warranty?

  Yes, all Hansen manufactured products carry our Limited Lifetime Warranty (visit our web site for details)

  ◄Why would I use Hansen Easy Fit Compression Fittings on my property?

  Your question should be ‘why wouldn’t I use Hansen Easy Fit Compression Fittings on my property?” They are manufactured in Whangarei, we have the complete range, it carries our Limited Lifetime Warranty and it also carries the Hansen brand, being the most used and trusted pipe fittings available in New Zealand for over 60 years.

  "#">◄How tight should I tighten my Easy Fit Compression fittings?

  Up to 32mm just tighten hand tight and all sizes above use a spanner to tighten another 1/2 to 1 turns past hand tight. Remember you already have a seal once the pipe is past the O-Ring, all the Nut is doing is compressing the Grip Ring onto the pipe to hold the pipe in place.

  ◄Does the pipe need a chamfer?

  We recommend the end of the pipe is cut square and is chamfered if not using a pipe liner.