Search

BMT-DDHK01

Downpipe Diverter Hose Kit & Rain Barrel Linking Kit 32mm

Kit

Big Water Tanks stocks two Rain Harvesting 32mm (1¼") hose kits. The Downpipe Diverter Hose Kit (DDHK01) connects your downpipe diverter to a rain barrel, and the Rain Barrel Linking Kit (RBLK01) joins two rain barrels together. Each comes with a 1.2m hose, stainless steel clamps, barrel outlet and a 35mm hole saw. Choose the kit you need above.

Downpipe Diverter Hose Kit and Rain Barrel Linking Kit: 32mm (1¼") Hose Kits

Rain Harvesting says: "The Downpipe Diverter Hose Kit allows you to connect your downpipe diverter to your rain barrel so you can start collecting water quickly and easily." And: "The Rain Barrel Linking Kit allows you to connect two rain barrels together so you can increase your storage capacity. As your requirements grow, you can easily add more rain barrels and linking kits to grow your system."

Quick Facts

  • Two kits: Downpipe Diverter Hose Kit (DDHK01) or Rain Barrel Linking Kit 32mm (RBLK01)
  • Hose: 1.2m (4 ft) of 32mm (1¼") hose in each kit
  • Flow: Up to 1,200L/hr (300 gal/hr) when used with Rain Harvesting downpipe diverters
  • Barrel hole: 35mm (1⅜"), hole saw included
  • Suits: The Downpipe Diverter Round and Quickfit Diverter Round, which both include a 32mm (1¼") hose fitting
  • Made by: Rain Harvesting by Blue Mountain Co

Hose Kit vs Linking Kit

Downpipe Diverter Hose Kit (DDHK01) Rain Barrel Linking Kit 32mm (RBLK01)
Use Connects your downpipe diverter to your rain barrel Connects two rain barrels together to increase your storage
Rain barrel outlets 1 2
Hose 1.2m (4 ft), 32mm (1¼") 1.2m (4 ft), 32mm (1¼")
Hose clamps 2 stainless steel 2 stainless steel
Hole saw 35mm (1⅜") 35mm (1⅜")

Key Features & Benefits

  • Connect your system: The hose kit is designed to link Rain Harvesting downpipe diverters to any rain barrel. The 32mm (1¼") hose also fits a variety of other devices, so you can build on your existing system.
  • Capture more rainwater: "It might look tiny, but the hose is surprisingly effective." Used with Rain Harvesting downpipe diverters, it captures up to 1,200L/hr (300 gal/hr).
  • Expand your system: Link multiple rain barrels together as your system grows. As you add more barrels, add another Rain Barrel Linking Kit to join them.
  • All-inclusive kits: "We've included all the fittings you will require", plus a hole saw, so you can set your system up today.
  • The perfect match: The linking kit is the perfect companion for Rain Harvesting downpipe diverters, and Rain Harvesting says it will suit almost any rain barrel.

Maintenance

Rain Harvesting: "When properly installed, your Downpipe Diverter Hose Kit should be maintenance-free." The guide says the same of the Rain Barrel Linking Kit.

For the best flow, keep the hose in a smooth path with no kinks, and keep the downpipe diverter itself clean (see its product page for how).

From Rain Harvesting's Downpipe Diverter Hose Kit and Rain Barrel Linking Kit Installation and Specification Guides.

What's in the Box

Downpipe Diverter Hose Kit (DDHK01):

  • Rain Barrel Outlet
  • 1.2m (4 ft) length hose, 32mm (1¼") diameter
  • Stainless steel hose clamps x 2
  • Hole saw 35mm (1⅜")

Rain Barrel Linking Kit 32mm (RBLK01):

  • Rain Barrel Outlet x 2
  • 1.2m (4 ft) length hose, 32mm (1¼") diameter
  • Stainless steel hose clamps x 2
  • Hole saw 35mm (1⅜")

Tools you may need: cordless drill, spanner, marker pen, spirit level, knife and screwdriver.

From Rain Harvesting's Downpipe Diverter Hose Kit and Rain Barrel Linking Kit Installation and Specification Guides.

Good to Know

How It Works

Hose kit: fit the Rain Barrel Outlet to your barrel, fit the 1¼" barbed outlet to your downpipe diverter, and run the 32mm hose between them. Rain Harvesting calls it "the perfect companion for any Rain Harvesting Downpipe Diverter."

Linking kit: fit a Rain Barrel Outlet to each barrel, towards the top to maximise storage, and join them with the hose so the second barrel fills from the first.

Installation in Brief

Downpipe Diverter Hose Kit

1Pick the position

Choose a spot for your downpipe diverter that gives the hose a smooth path to your barrel; see the diverter's installation guide.

2Drill the barrel

Use a cordless drill and the supplied hole saw to drill a hole where the outlet will go. Make sure the edges are free from burrs.

3Fit the barrel outlet

Insert the main body of the Rain Barrel Outlet through the hole so the barbed end sticks out of the barrel. Hold it in place, screw the nut onto the outside and tighten it with a spanner.

4Fit the diverter outlet

Install the 1¼" barbed outlet onto your downpipe diverter.

5Cut the hose

Cut the 32mm hose with a knife to suit the distance between the diverter outlet and the barrel outlet, so it forms a smooth path for unrestricted flow.

6Clamp it on

Loosen both hose clamps and put one on each end of the hose. Press the hose onto each barbed outlet so it covers all of the barbed section (warm water softens the hose if needed), then tighten the clamps so they grip both the hose and the outlet.

Rain Barrel Linking Kit

  • Pick a position towards the top of your rain barrels to maximise storage volume.
  • Drill a hole in the first barrel with the supplied hole saw, insert a Rain Barrel Outlet with the barbed end out, and tighten the nut with a spanner. Repeat for the second barrel.
  • Cut the 32mm hose to suit the distance between the outlets, keeping a smooth path for unrestricted water flow.
  • Put a hose clamp on each end, press the hose fully over each barbed outlet (warm water helps), and tighten both clamps.

Steps condensed from Rain Harvesting's Downpipe Diverter Hose Kit and Rain Barrel Linking Kit Installation and Specification Guides. Download the full guides below.

Specifications

Code A B C D E F G
DDHK01 Suits 32mm Hose 35 39 60 45 32 1200
RBLK01 Suits 32mm Hose 35 39 60 45 32 1200

All dimensions in mm, from Rain Harvesting's Downpipe Diverter Hose Kit and Rain Barrel Linking Kit Installation and Specification Guides. Both guides list the same figures for the outlet and hose.

Rain barrel outlet and 32mm hose dimension drawing, lettered A to G

Top: Rain Barrel Outlet. Bottom: 1.2m (4 ft) length hose, 32mm (1¼") diameter.

  • ASuits 32mm hose
  • B35mm
  • C39mm
  • D60mm
  • E45mm
  • F32mm
  • G1200mm hose length

Downloads

Videos

Downpipe Diverter Hose Kit - Overview

How to Install a Downpipe Diverter Hose Kit

Rain Barrel Linking Kit - Overview

Rain Barrel Linking Kit - What's In The Box?

How to Install: Rain Barrel Linking Kit

Official videos from Rain Harvesting's YouTube channel.

Frequently Asked Questions

Which kit do I need?

Choose the Downpipe Diverter Hose Kit to connect a downpipe diverter to your rain barrel. Choose the Rain Barrel Linking Kit to join a second barrel to the first. Many setups use one of each.

Does it fit the Big Water Tanks diverters?

Yes. The Downpipe Diverter Round and the Quickfit Diverter Round both include a 32mm (1¼") hose fitting.

How much water does the hose carry?

Rain Harvesting says up to 1,200L/hr (300 gal/hr) when used with its downpipe diverters. The Quickfit Diverter Round collects up to 750 L/hour on the 32mm hose.

Do I need any special tools?

A 35mm (1⅜") hole saw is included. You may also need a cordless drill, spanner, marker pen, spirit level, knife and screwdriver.

Can I link more than two barrels?

Yes. Rain Harvesting says to add another Rain Barrel Linking Kit for each barrel you add.

Should I use a diverter on a large tank?

We recommend downpipe diverters for tanks of 2000L and under. For tanks of 3000L and larger, we recommend our 100mm Overflow and Inlet Vent Kit and diverting all the water into the tank, letting the tank's overflow handle the excess. See our larger water tanks.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)