Search

BMT-DDIV201

Downpipe Diverter Round 65mm/80mm/90mm - Rain Barrel Diverter

Big Water Tanks stocks the Rain Harvesting Downpipe Diverter Round, NZ model DDIV201 for 65mm, 80mm and 90mm round downpipe. It captures water from your downpipe while its built-in filter keeps leaves out, and feeds it by hose to a rain barrel or small tank.

Recommended for tanks of 2000L and under. For larger tanks, we recommend sending all the water into the tank and letting the overflow handle the excess.

Downpipe Diverter Round: Rain Barrel Diverter for 65mm, 80mm and 90mm NZ Downpipe

Recommended for tanks of 2000L and under

A downpipe diverter only takes part of the flow from your downpipe (up to 600 L/hour with a 12mm garden hose, or 1200 L/hour with the 32mm hose, per Rain Harvesting). That suits a rain barrel or a small tank of up to 2000 litres.

For larger tanks, Big Water Tanks recommends sending all the water from your downpipes into the tank and letting the tank's overflow handle the excess, so you capture every heavy downpour. See our larger water tanks or the Rain Harvesting range for rain heads and first flush diverters that go with a full-flow system. Not sure? ask us.

For tanks of 3000L and larger, we recommend our 100mm Overflow and Inlet Vent Kit on the tank inlet and overflow.

Rain Harvesting says: "This diverter captures the water flowing through your downpipes, while filtering leaves and debris – giving you lots of great quality rainwater. It's the easiest way to start collecting water today."

Quick Facts

  • Type: In-line downpipe diverter with an integrated leaf filter and On/Off switch
  • NZ model: DDIV201, for 65mm, 80mm and 90mm round downpipe (adaptors included)
  • Water capture: Up to 600 L/hour (150 gal/hr) with a 12mm (½") garden hose; up to 1200 L/hour (300 gal/hr) with the 32mm (1¼") high flow hose
  • Hose fittings: 12mm (½") garden hose and 32mm (1¼") hose fittings included; 1" BSP male nozzle
  • Installation: Cut a section out of your downpipe and slide the diverter in; the diverter itself needs no glue
  • Best for: Rain barrels and tanks of 2000L and under
  • Made by: Rain Harvesting by Blue Mountain Co

Key Features & Benefits

  • Capture huge volumes of rainwater: Rain Harvesting says it has "proved to collect up to 1,200L/hr (300 gal/hr)" with its 32mm (1¼") high flow hose, or up to 600 L/hour with a 12mm (½") garden hose.
  • Integrated leaf strainer: The integrated filter keeps leaves out of your rain barrel. A rain head upstream is optional, though it gives a finer level of filtration.
  • Easily installed: "The simple installation doesn't even require glue." Cut a section of pipe out, slide the Downpipe Diverter into place, then add a rain barrel and a Downpipe Diverter Hose Kit.
  • On/Off switch: Stop collecting water when your rain barrel is full, or in winter, at the turn of a dial, then start again whenever you want.
  • Simple connections: Fittings for a ½" garden hose and the 1¼" high flow hose are included, so you can set the system up however you need.

Maintenance

Rain Harvesting: "For the best performance, check your downpipe diverter periodically by lifting the slip coupling up to remove any leaves which might have become lodged on the Filter."

  1. Lift the slip coupling up and remove any leaves lodged on the filter.
  2. The body of the Downpipe Diverter and the filter can be removed easily by hand.
  3. Clean the filter by brushing or hosing it, then return it to its place.

How often depends on the environment around you. In a high leaf area, check it more regularly.

From Rain Harvesting's Downpipe Diverter Round Installation and Specification Guide.

What's in the Box

  • Downpipe Diverter Round
  • 12mm (½") garden hose fitting and seal
  • 32mm (1¼") hose fitting and seal
  • Adaptors for NZ 80mm and 65mm downpipe (see Pipe Compatibility)

Tools and materials you may need: tape measure, marker pen, saw, spirit level and solvent cement glue (for the outlet pipe adaptors on 80mm and 65mm downpipe).

The hose to your barrel is not included. For the 32mm high flow connection, add the Downpipe Diverter Hose Kit.

From Rain Harvesting's Downpipe Diverter Round Installation and Specification Guide.

Pair It with the Right Tank

The Downpipe Diverter Round is made for rain barrels and smaller tanks of 2000L and under. Connect it with the Downpipe Diverter Hose Kit, and join extra barrels with the Rain Barrel Linking Kit. For a bigger tank, we recommend running the whole downpipe into the tank with an overflow; see our larger water tanks and the rest of our Rain Harvesting range, including the Leaf Eater® Stream Original, a slim rain head that sits in your downpipe.

For 100mm pipe or a quicker drill-and-push fit on 80 to 100mm pipe, see the Quickfit Diverter Round.

How It Works

Water coming down your downpipe passes through the diverter's leaf filter. Clean water goes out the hose to your rain barrel, while leaves and debris carry on down the pipe to your stormwater system. The On/Off switch lets you stop collecting at any time.

How the Rain Harvesting Downpipe Diverter Round works, lettered A to F
  • AWater flow from roof
  • BOn/Off switch
  • CLeaf filter
  • DInterchangeable hose fittings: a standard garden hose or high flow 32mm (1¼") hose
  • EDebris diverted to stormwater system
  • FTo rain barrel or storage

Flow Diverter: the diverter comes with a Flow Diverter that snaps in and out of the Upper Slip Coupling to maximise water capture. Rain Harvesting recommends it only if you have a rain head or gutter mesh upstream to filter out large debris. Without one, leave the Flow Diverter out; you will still catch a high flow of water.

Labels from the diagram in Rain Harvesting's Downpipe Diverter Round Installation and Specification Guide.

Pipe Compatibility & Adaptors

Downpipe Inlet (top) pipe Outlet (bottom) pipe
90mm No adaptor required No adaptor required
80mm 80mm Slip Adaptor (K0945): insert it into the Upper Slip Coupling, no glue required 80mm Socket Adaptor (K0905): glue it onto the outlet pipe; the Downpipe Diverter sits on it
65mm 65mm Adaptor (G in the drawing) 65mm Socket Adaptor (K0920): glue it onto the outlet pipe with the flat side against the wall so it does not push your downpipe out; the Downpipe Diverter sits on it

Suggested installation orientations (Rain Harvesting's Figure 1, NZ pipe sizes):

Downpipe Diverter Round adaptor orientations for 90mm, 80mm and 65mm downpipe, lettered A to G
  • AUpper Slip Coupling
  • BFlow Diverter
  • CFilter
  • DDownpipe Diverter
  • EUpper 80mm Adaptor
  • FLower 80mm Adaptor
  • G65mm Adaptor

Adaptor details from Rain Harvesting's Downpipe Diverter Round Installation and Specification Guide. Rain Harvesting also lists a DDIV21 model for 100mm pipe; for 100mm downpipe, see the Quickfit Diverter Round or ask us.

Installation in Brief

Measure from the top of your rain barrel, cut out a section of downpipe and slide the diverter in. Download the full guide below before you cut any pipe.

Downpipe Diverter Round cut points A and B with hose and rain barrel
  • ALower cut point
  • BSection of pipe to remove
  • CHose
  • DRain barrel
Downpipe Lower cut (A) Top cut (B)
90mm 75mm below the top of the rain barrel 210mm above the bottom cut
80mm 100mm below the top of the rain barrel 230mm above the bottom cut
65mm 100mm below the top of the rain barrel 270mm above the bottom cut

1Choose the position

Pick a spot that gives the hose a smooth path to your barrel. If you are using the inlet hose to limit the water height in your barrel, make sure the outlet is below the top of the barrel. Mark the lower cut point (A) using the table above.

2Cut out the section

Mark the top cut and remove the section of pipe (B). Make sure all cut edges are clean and smooth.

3Decide on the Flow Diverter

Use it only if you have a rain head or gutter mesh upstream. It snaps in and out of the Upper Slip Coupling.

4Fit any adaptors

On 80mm or 65mm downpipe, fit the inlet and outlet adaptors as shown in Pipe Compatibility.

5Fit the Upper Slip Coupling

Slide the Upper Slip Coupling onto the upper section of pipe until it bottoms out (no glue required).

6Insert the diverter

Holding the Upper Slip Coupling in place, insert the Downpipe Diverter onto the pipe (no glue required), then lower the Slip Coupling back into position.

7Connect the hose

Rotate the nozzle to the direction you need, screw on your preferred hose fitting, and connect the hose to your rain barrel or tank.

Steps condensed from Rain Harvesting's Downpipe Diverter Round Installation and Specification Guide.

Specifications

Code Pipe size A B C D E
DDIV201 65mm 65 F 305 133 99 1" BSP Male
DDIV201 80mm 80 F 283 133 99 1" BSP Male
DDIV201 90mm 90 F 248 133 99 1" BSP Male

All dimensions in mm, from Rain Harvesting's Downpipe Diverter Round Installation and Specification Guide. F = female / socket fitting.

Downpipe Diverter Round dimension drawing, lettered A to E
  • APipe fitting: 65 F, 80 F or 90 F
  • BHeight: 305, 283 or 248mm depending on the fitting
  • C133mm
  • D99mm
  • E1" BSP male hose nozzle

Downloads

Installation Guide (PDF) Rain Harvesting: Downpipe Diverter Round

The installation guide is published by Rain Harvesting by Blue Mountain Co.

Videos

How to install your Downpipe Diverter Round

Downpipe Diverter Round Maintenance

Downpipe Diverter Round Product Overview

Official videos from Rain Harvesting's YouTube channel.

Frequently Asked Questions

Is a downpipe diverter right for my tank?

We recommend it for rain barrels and tanks of 2000L and under. A diverter only takes part of the downpipe flow (up to 600 L/hour with a 12mm garden hose, or 1200 L/hour with the 32mm hose). For larger tanks, Big Water Tanks recommends diverting all the water into the tank and letting the tank's overflow handle the excess. See our larger water tanks.

What size downpipe does it fit?

The NZ model DDIV201 fits 65mm, 80mm and 90mm round downpipe. 90mm needs no adaptor; 80mm and 65mm use the adaptors in the box. For 100mm round downpipe, see the Quickfit Diverter Round.

Do I need glue?

Not for the diverter itself: you cut a section out and slide it in. On 80mm and 65mm downpipe, the outlet pipe socket adaptor is glued onto the pipe below, so have solvent cement glue on hand.

Which hose should I use?

A 12mm (½") garden hose collects up to 600 L/hour. The 32mm (1¼") high flow hose collects up to 1200 L/hour; the Downpipe Diverter Hose Kit has the hose, clamps, barrel outlet and hole saw.

Should I fit the Flow Diverter?

Only if you have a rain head or gutter mesh upstream. Without one, Rain Harvesting says not to use the Flow Diverter; you will still catch a high flow of water.

How do I stop it filling a full barrel?

Turn the On/Off switch to off. Rain Harvesting suggests this when your barrel is full or in winter.

How is it different from the Quickfit Diverter Round?

The Downpipe Diverter Round replaces a section of your downpipe and collects up to 1200 L/hour. The Quickfit Diverter Round fits 80 to 100mm pipe through a 35mm hole and collects up to 750 L/hour.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)